Belt conveyor type BS80

Belt conveyor type BS80

The BS80 belt conveyor is the more robust version of the BS60 belt conveyor and can be equipped with a drum motor. With a roller diameter of 80 mm and larger bearings, it can carry more weight. The BS80 performs best when used in dry to humid and clean to slightly dirty environments.

Stainless steel belt conveyor type BS80

Terms of application

The BS80 belt conveyor is a hygienic transport solution. This versatile belt conveyor has many variants and in order to use the BS80 belt conveyor, your application should meet the following conditions to ensure a long service life:

Environment: Dry to moist and clean to slightly dirty

Load: Max. 300 kg

Speed: Max. 125 m/min

Roller diameter: Standard Ø80 mm (Ø16 knife edge)

The BS80 belt conveyor has a stainless steel set frame and is designed from the experience of our users. Thanks to the choice of materials and their hygienic design, the stainless steel belt conveyors are suitable for the food industry (HACCP environment), the pharmaceutical industry and the chemical industry, among others. In the design phase, good cleanability is taken into account by standard or optional application of
  • a folding idler roller
  • a drum motor
  • a foldable side guide
  • a removable hopper
  • an FDA and/or HACCP approved belt material
  • an easily removable belt
  • an open frame for good accessibility during cleaning
When determining the specifications of a stainless steel conveyor belt, it is important to know the cleaning conditions well, as these have a major influence. For example, if the work (and start-up) is done wet, the risk of vacuum migration of the belt material on the frame is very high. To prevent this, the drive roller is often coated, a heavier motor is used and/or bumps are punched in the sliding deck.

Partly because of the modular concept, it is possible to make various types of stainless steel belt conveyors of any type, such as a flat stainless steel belt conveyor, elevator, feeder conveyor, bunker conveyor, curve conveyor, articulated conveyor or Z conveyor.

Technical specifications

  • Basic: stainless steel frame with folding idler side for cleaning purposes
  • Transport direction: unidirectional
  • Belt width: 300 - 1,200 mm
  • Length: 400 - 25,000 mm
  • Roller diameter: Ø80 mm (standard) / Ø16 mm (fixed or rolling knife edge)
  • Drive type: (in)direct end drive
  • Motor position: Combination of left/right and pulling/pushing
  • Speed: Max. 125 m/min (depending on version)
  • Type of rollers: Stainless steel roller / vulcanised roller
  • Drive: Standard drum motor 3x230/400V, 50 Hz, IP66
  • Belt material: Choice of various brands, materials, frictions and colours
  • Basic frame fitted with a bend
  • Slide deck fitted with humps
  • Drive shaft fitted with a customer-specific shaft journal
  • Other drum motor configuration/brand or slip-on geared motor
  • Stainless steel transition rollers Ø16 mm
  • Drive roller equipped with various types of coatings for better grip
  • Various belt accessories such as carriers, belts or mechanical connectors
  • Underframe on adjustable feet or castors with brake
  • Side guidance (fixed, adjustable or folding)
  • Electric control
For all options, please contact us.
Application of an stainless steel belt conveyor