BCK products in stock

View below some BCK products that are in stock. Would you like to know the price of one of the BCK products? Then contact us directly for a competitive offer. Options such as an emergency stop box with plug, frequency controller or side guide can always be mounted on the BCK product by us to obtain your desired configuration.

Product 1: Aluminium belt conveyor (188432-010_213235-010)

Conveyor belt type: N60 base aluminium, stainless steel skid plate
Conveyor direction: Unidirectional
Feed side roller diameter: approx. 60 mm
Output side roller diameter: approx. 60 mm
Belt width: approx. 200 mm
Length centre-to-centre rollers: Approx. 2,000 mm
Drive type: D10 direct final drive
Drive position: On the left, seen from the infeed side
Rated conveying speed: approx. 14.5 m/min at 50 Hz
Version of rollers: Drive roller fitted with PVC 3 mm
Inox package: -
Belt material: 2001003301: PVC, medium friction, green
Strap accessories: -
Motor gearbox: Unidrive motor gearbox 4-pole, 230/400V, 50 Hz, IP55
Electrical control options: Exclusive, but can be provided by us.
Underframe: Exclusive, but can be supplied by us.
Side guide: Exclusive, but can be supplied by us.

Product 2: Roller conveyor RBB 200-2000

Roller type: Steel galvanised; U-profile 20 / 70 / 20
Roller width: approx. 200 mm
Length: approx. 2,000 mm
Roller diameter: approx. 50 mm
Roller distance: approx. 62.5 mm
Roll execution: Plastic blue rollers 50 x 2.8 mm;
Inox package: -
Underframe: Steel construction in H-shape, colour RAL5015 blue; Height: approx. 870 - 1,350 mm
Side guide: Exclusive, but can be provided by us.
Including end stop

Product 3: Aluminium belt conveyor N114 (213090-010) (NEW)

Conveyor belt type: N114 Basic aluminium, stainless steel skid plate
Conveyor direction: Unidirectional
Feed side roller diameter: approx. 114 mm
Roller diameter output side: approx. 114 mm
Belt width: approx. 500 mm
Length centre-to-centre rollers: Approx. 2,000 mm
Drive type: D10 direct final drive
Drive position: On the left, seen from the infeed side
Rated conveying speed: approx. 16.7 m/min at 50 Hz
Version of rollers: Aluminium hard anodised rollers
Stainless steel package: -
Belt material: 2001004302: PVC, high friction, green
Strap accessories: -
Motor gearbox: Unidrive motor gearbox 4-pole, 230/400V, 50 Hz, IP55
Electrical control options: Exclusive, but can be provided by us.
Underframe: Reinforced aluminium profile construction in H-shape on adjustable feet; Nominal height: approx. 850 mm
Side guide: Exclusive, but can be supplied by us.

Product 4: Aluminium round conveyor type KDZ (220864-010) (NEW)

Base: Outer aluminium, inner steel, cover strip stainless steel
Angle: 180°
Transport direction: counterClockwise and counterClockwise
Transitions: Ø40 mm (cylindrical)
Belt width: approx. 500 mm
Inner radius: 0 mm
Outer radius: approx. 500 mm
Type of drive: Direct final drive via friction wheel
Drive position: Mounted on outer radius
Nominal conveying speed: Approx. 10 m/min
Inox package: -
Belt material: Ammeral 575151: Ropanyl EF 10/2 0+02 black M2
Strap accessories: -
Motor gearbox: Unidrive motor gearbox 4-pole, 230/400V, 50 Hz, IP55
Electrical control options: Exclusive, but can be provided by us.
Underframe: H-shaped aluminium profile construction on adjustable feet; Nominal height: approx. 900 mm
Side guide: Exclusive, but can be supplied by us

Product 5: Aluminium chain conveyor type C83 (10006-010-01)

Base: Outer aluminium, plastic sliding profiles
Transport direction: Unidirectional
Input side diameter: approx. 83 mm
Output side diameter: approx. 83 mm (with transition module)
Chain width: approx. 400 mm
Length: approx. 2,860 mm
Drive type: Direct final drive
Position of drive: on the right, seen from the infeed side
Nominal conveying speed: Approx. 12.3 m/min
Inox package: -
Chain material: Flush Grid
Chain accessories: -
Gearmotor: Unidrive gearmotor 4-pole, 230/400V, 50 Hz, IP54
Electrical control options: Exclusive, but can be provided by us.
Underframe: H-shaped aluminium profile construction on adjustable feet; Nominal height: approx. 935 mm
Side guide: Exclusive, but can be supplied by us.

Product 6: Aluminium belt conveyor (213234-212671-010) (NEW)

Conveyor belt type: N60 base aluminium, stainless steel skid plate
Conveyor direction: Unidirectional
Feed side roller diameter: approx. 16 mm (fixed blade)
Output side roller diameter: approx. 60 mm
Belt width: approx. 400 mm
Length centre-to-centre rollers: Approx. 2,000 mm
Drive type: D10 direct final drive
Drive position: On the left, seen from the infeed side
Rated conveying speed: approx. 14.5 m/min at 50 Hz
Version of rollers: Drive roller fitted with PVC 3 mm
Inox package: -
Belt material: 2002001101: TPU, low friction, black
Tyre accessories: -
Motor gearbox: Unidrive motor gearbox 4-pole, 230/400V, 50 Hz, IP55
Electrical control options: Variable speed with frequency controller and emergency stroke button. IP65 frequency switch in plastic housing (v -40%/+20%).
Underframe: Telescopic aluminium profile construction in H-shape on M8 leveling feet; Nominal height: approx. 900 mm (760-1040 mm)
Side guide: Exclusive, but can be provided by us.

Product 7: Aluminium belt conveyor (213264-010) (NEW)

Conveyor belt type: N60 base aluminium, stainless steel skid plate
Conveyor direction: Unidirectional
Feed side roller diameter: approx. 60 mm
Output side roller diameter: approx. 60 mm
Belt width: approx. 500 mm
Length centre-to-centre rollers: Approx. 1,500 mm
Drive type: D10 direct final drive
Drive position: On the left, seen from the infeed side
Rated conveying speed: approx. 17.6 m/min at 50 Hz
Version of rollers: Standard: Aluminium hard anodised rollers
Stainless steel package: -
Tyre material: 2002001101: TPU, low friction, black
Tyre accessories: -
Motor gearbox: Unidrive motor gearbox 4-pole, 230/400V, 50 Hz, IP55
Electrical control options: Exclusive, but can be provided by us.
Underframe: H-shaped aluminium profile construction on M8(LT22) adjustable feet; Nominal height: approx. 900 mm (+/-10 mm)
Side guide: Exclusive, but can be supplied by us.

Product 8: Galvanised steel round conveyor VEHO Curve (231158-220639-010) (NEW)

Round conveyor type: VEHO Curve Steel galvanised
Angle (outside rollers): 90°
Conveyor direction: counterclockwise
Largest diameter pulleys: Conical Ø70 - Ø130 mm
Belt width: approx. 600 mm
Inner radius of modular belt: approx. 600 mm
Drive type: D10 direct final drive
Drive position: Mounted on outer radius
Nominal conveying speed: n.a.
Inox package: -
Belt material: Blue plastic modular belt (FDA, material POM) with plastic pins (material POM) Ø 4.9 mm, temperature range -40°C to +80°C
Strap accessories: -
Motor gearbox: Unidrive motor gearbox 4-pole, 230/400V, 50 Hz, IP55
Electrical control options: Exclusive, but can be provided by us.
Underframe: galvanised steel H-shaped construction on adjustable feet; Nominal height: approx. 900 mm
Side guide: Exclusive, but can be supplied by us.

Product 8: Galvanised steel round conveyor VEHO Curve (202947-010)

Product 9: Flexibel roller conveyor (NEW)

Roller conveyor type: HRB Non-driven flexible gravity roller conveyor
Base material: Zinc-plated steel
Runway width: Approx. 500 mm
Minimum length: approx. 3.3 metres
Maximum length: approx. 7.9 metres
Roller diameter: Ø50 x 2.8 mm
Number of rollers per axle: Each axle (total of 64 axles) equipped with 3 rollers
Version of rollers: Plastic blue
Inox package: -
Underframe: Zinc-plated steel construction in H-shape (5 pieces) on swivel castors with brake. Height adjustment from approx. 700 to approx. 1100 mm
Including end stop

Product 10: Aluminium round conveyor KDC (181540-010)

Round conveyor type: KDC Basic aluminium
Angle (outside rollers): 90°
Conveyor direction: clockwise/counterclockwise
Largest diameter pulleys: Cylindrical Ø40 mm
Belt width: approx. 900 mm
Belt outer radius: approx. 1300 mm
Drive type: D30 Direct central drive via friction roller
Drive position: Mounted on outer radius
Nominal conveying speed: Approx. 10 m/min at 50 Hz (centre line of the belt)
Inox package: -
Belt material: PVC, green, medium friction, FDA
Belt accessories: -
Belt guide: Ball bearing idlers type 6 KDC steel
Motor gearbox: Unidrive motor gearbox 4-pole, 230/400V, 50 Hz, IP55
Electrical control options: Exclusive, but can be provided by us.
Underframe: H-shaped aluminium profile construction on M16 leveling feet; Nominal height: approx. 1,160 mm
Side guide: Fixed stainless steel side guide with a height of approx. 100 mm

Product 11: Aluminum mattop conveyor C83 (224110-010)

Base: Exterior aluminum, plastic sliding profiles
Transport Direction: Unidirectional
Input side diameter: Approx. 83mm
Diameter output side: Approx. 83 mm
Chain Width: Approx. 595mm
Length: Approx. 3,000mm
Type of drive: Direct final drive
Position of the actuator: Left as seen from the input side
Rated Transport Speed: Approx. 12.3 m/min
Inox package: -
Chain Material: Flush Grid
Chain accessories: Fitted with wheels (white) for accumulation
Motor gearbox: Unidrive motor gearbox 4 pole, 230/400V, 50 Hz, IP54
Electric control options: Variable speed with frequency converter (IP65) and emergency stroke button.
Chassis: Aluminum profile construction in H-shape on adjustable feet; Nominal height: approx. 900 mm
Side guide: Adjustable side guide type GR61, 40 mm black plastic side guide.

Product 12: Stainless steel turntable Ø900 mm (NEW)

Finish: stainless steel 1.4301
Top: Ø 900 mm. thick, 3 mm. with supporting cross on underside
Edge: Stationary edge with a height of 30 mm. around the top
Crank: Adjustable crank to move products to the centre of the table
Frame: 3 leg tubular frame around plating and fitted with plastic adjustable feet
Top height: 900 mm. +/- 50 mm
Drive: Geared motor 3x230/400V - 4 rpm.
Transmission: The blade is driven directly by the motor (no chain or belts)
Electrical control options: 16A plug 400V with on/emergency stop from cabinet
Finish: shot-blasted frame, plating finish 2B

Product 13: Stainless steel turntable Ø1250 mm (NEW)

Finish: stainless steel 1.4301
Top surface: Ø 1,250 mm. thick 3 mm. with supporting cross on underside
Edge: Stationary edge with a height of 30 mm. around the top
Crank: Adjustable crank to move products to the centre of the table
Frame: 3 leg tubular frame around plating and fitted with plastic adjustable feet
Top height: 900 mm. +/- 50 mm
Drive: Geared motor 3x230/400V - 4 rpm.
Transmission: The blade is driven directly by the motor (no chain or belts)
Electrical control options: 16A plug 400V with on/emergency stop from cabinet
Finish: shot-blasted frame, plating finish 2B

Product 14: Stainless steel turntable Ø1500 mm (NEW)

Finish: stainless steel 1.4301
Top surface: Ø 1,500 mm. thick 3 mm. with supporting cross on underside
Edge: Stationary edge with a height of 30 mm. around the top
Crank: Adjustable crank to move products to the centre of the table
Frame: 3 leg tubular frame around plating and fitted with plastic adjustable feet
Top height: 900 mm. +/- 50 mm
Drive: Geared motor 3x230/400V - 4 rpm.
Transmission: The blade is driven directly by the motor (no chain or belts)
Electrical control options: 16A plug 400V with on/emergency stop from cabinet
Finish: shot-blasted frame, plating finish 2B

Product 15: Galvanised steel round conveyor R100 (NEW)

Round conveyor type: R100 Basic steel galvanised
Angle (outside rollers): 90°
Conveyor direction: clockwise/counterclockwise
Largest diameter pulleys: Conical Ø100 mm
Belt width: approx. 600 mm
Outer radius of belt: approx. 1,200 mm
Drive type: D10 direct final drive
Drive position: Mounted on outer radius
Nominal conveying speed: N/A
Inox package: -
Tyre material: PU, black, medium friction
Tyre accessories: -
Belt guide: Type 6 steel ball bearing rollers
Motor gearbox: Unidrive motor gearbox 4-pole, 230/400V, 50 Hz, IP55
Electrical control options: Exclusive, but can be provided by us.
Underframe: galvanised steel H-shaped construction on adjustable feet; Nominal height: approx. 900 mm
Side guide: Exclusive, but can be supplied by us.

Product 16: Aluminum Matt Top Conveyor C99 (224110-020)

Base: Exterior aluminum, plastic sliding profiles
Transport Direction: Unidirectional
Input side diameter: Approx. 120mm
Diameter output side: Approx. 120 mm
Chain Width: Approx. 595mm
Length: Approx. 3,000mm
Type of drive: Direct final drive
Position of the actuator: Left as seen from the input side
Rated Transport Speed: Approx. 12.3 m/min
Inox package: -
Chain material: Roller top 0.5 inch
Chain accessories: Fitted with wheels for accumulation
Motor gearbox: Unidrive motor gearbox 4 pole, 230/400V, 50 Hz, IP54
Electric control options: Variable speed with frequency converter (IP65) and emergency stroke button.
Chassis: Aluminum profile construction in H-shape on adjustable feet; Nominal height: approx. 900 mm
Side guide: Adjustable side guide type GR61, 40 mm black plastic side guide.

Product 17: Steel-coated round belt conveyor R150 (NEW)

Round conveyor type: R150 Basic steel coated RAL 9006
Angle (outside rollers): 90°
Conveyor direction: counterclockwise
Largest diameter pulleys: Conical Ø150 mm
Belt width: approx. 1,000 mm
Outer radius of belt: approx. 1,400 mm
Drive type: D10 direct final drive
Drive position: Mounted on outer radius
Nominal conveying speed: N/A
Inox package: -
Tyre material: PU, black, medium friction
Tyre accessories: -
Tyre guide: Type 8 NR steel ball bearing rollers
Motor gearbox: Exclusive, but can be provided by us.
Electric control options: Exclusive, but can be provided by us.
Underframe: galvanised steel H-shaped construction on adjustable feet; Nominal height: approx. 900 mm
Side guide: Exclusive, but can be supplied by us.