Below you can see some technical specifications and possibilities of the BCK stainless steel belt conveyors. Click on the photos on the right of the text to enlarge the photo or to see the more options. It is almost impossible to show all options and possibilities. Please contact us when you have other technical wishes.
Basic
- Stainless steel (AISI304) frame with standard a folding idler side
- Stainless steel (AISI316) frame with standard a folding idler side
|
|
Sliding plate
The sliding plate is the top of the base frame. Depending on the application, there are bumps punched in the sliding plate to prevent slip-stick.
|
|
Transport direction
- Unidirectioneel
- Bidirectional (advice is to apply a belt with 2 V-extrusions)
|
|
Roller diameter
- Type BS54: Ø 54 mm
- Type BS80: Ø 81 mm
- Type BS87: Ø 87 mm
- Type BS100: Ø 100 mm
- Type BS113: Ø 113 mm
|
|
Knife edges
It is possible to create a knife edge at the input or the output side.
|
|
Belt width
- Type BS54: 205/255/305/355/405/455/505/555/605/655/705/755/805
- Type BS80: 300/350/400/450/500/550/600/650/700/750/800/850/900/950/1000/1050/1100/1150/ 1200
- Type BS87: 205/255/305/355/405/455/505/555/605/655/705/755/805
- Type BS100: 205/255/305/355/405/455/505/555/605/655/705/755/805
- Type BS113: 300/350/400/450/500/550/600/650/700/750/800/850/900/950/1000/1050/1100/1150/1200
(other belt widths on request)
|
|
Length (c.t.c.)
There are no standard lengths. The length can be determined by the customer. On request we could integrate a positive and/or a negative bend in the frame.
|
|
Type of drive
- Direct end drive (D10)
- Indirect end drive(D20)
- Direct central drive (D30)
- Indirect central drive (D40)
|
|
Position of the drive unit
- Left, seen from the idler side (PDL)
- Right, seen from the idler side (PDR)
- Left, seen from the idler side (PUSHED) (PDLd)
- Right, seen from the idler side (PUSHED) (PDRd)
|
|
Velocity
On request.
|
|
Type of rollers
- RT50 Rollers with a steel shell
- RT51 Rollers with a steel shell, drive roller with PVC supergrip covering
- RT52 Rollers with a steel shell, drive roller vulcanized
- RT60 Rollers with a stainless steel (AISI304) shell
- RT61 Rollers with a stainless steel (AISI304) shell, drive roller with PVC supergrip covering
- RT62 Rollers with a stainless steel (AISI304) shell, drive roller vulcanized
- RT99 Special rollers on request
|
|
Stainless steel options (more than 1 option is possible)
- Stainless steel frame (standard)
- Stainless steel fasteners (standard)
- Stainless steel rollers (standard steel shell)
- Stainless steel bearings (standard steel)
|
|
Belt material
Material, friction, color and brand on request.
|
|
Belt accessories
- Flights (straight / bended / slanted / cube / trapezium)
- Corrugated edge
- Antispill edge
- V-extrusions
- Sponge rubber
- Mechanical belt connector
|
|
Motorreductor options (optional with a forced cooling ven)
- MR00 No motorreductor
- MR10 Standard motorreductor 230/400V, 50 Hz, IP55
- MR20 Standard motorreductor 230V, 50 Hz, IP55
- MR30 High-pressure spray-resistantmotorreductor 230/400V, 50 Hz, IP65
- MR60 SEW motorreductor, 230/400V, 50 Hz, IP54
- MR70 Drummotor IP65/66/67
- MR99 Special motorreductor on request (for example another brand)
|
|
Electrical control options
- E00 No electrical control options
- E10 Motor overload protection on/emergency stop off box
- E20 Motor overload protection on/emergency stop off box with turning-direction-switch and off button switch
- E30 Variable speed with frequency converter and emergency stop. IP65 frequency converter in a plastic housing (v - 40%/+20%)
- E40 Variable speed with frequency converter and emergency stop. Assembled in an IP55 housing (v - 40%/+20%)
- E50 Puls/pause relay steering with emergency stop. Assembled in an IP55 housing
- E60 Puls/pause relay steering with frequency converter and emergency stop. Assembled in an IP55 housing (v - 40%/+20%)
- E99 Special electrical control options
|
|
Support
- LT22 H-formed stainless steel construction on feet or wheels
- LT24 H-formed stainless steel construction on feet or wheels for belt widths smaller than 400 mm
- LT30 Telescopic H-formed stainless steel construction on feet or wheels
- LT31 Telescopic H-formed stainless steel construction on feet or wheels for belt widths smaller than 400 mm
- LT99 Special support on request
|
|
Side guide
- Side guide 17 mm, stainless steel (AISI304), flat UHMWPE
- Side guide 40 mm, stainless steel (AISI304), flat UHMWPE
- Stainless steel side guide 50 mm(option foldable)
- Special side guide on request
|
|
Extra options
- Beltcleaners
- Funnels
- Passive belt control
- Pneumatic belt control
- Etc.
|
|
