Below you can see some technical specifications and possibilities of the BCK aluminium belt conveyors. Click on the photos on the right of the text to enlarge the photo or to see the more options. It is almost impossible to show all options and possibilities. Please contact when you have other technical wishes.

 

Profile

  • Type N60: profile with T-slots suitable for M8
  • Type N114: profile with T-slots suitable for M8
Profile N60 and N114

Sliding plate

The sliding plate is standard a stainless steel sliding plate, that is mounted on the aluminium frame. On request the sliding plate can also be made of plastic or with rollers

 

Bearing

The bearing construction is made up of first-class bearings with a maximal size and double seal (2RS) The bearing is self-aligning so the bearing can be loaded optimally. This results in an optimal life span.

Bearing plate N60

Transport direction

  • Unidirectioneel
  • Bidirectioneel (advice is to apply a belt with V-extrusion)
 

Roller diameter

  • Type N60: Ø 60 mm
  • Type N114: Ø 114 mm
 

(Knife) edges

It is possible to create a fixed knife edge Ø16, rolling knife edge Ø20 mm, guide roller (plastic / stainless steel) Ø16 mm or a guide shaft Ø16 mm at the input or the output side.

Knife edge N60Plastic guide roller Ø 16 mmStainless steel guide shaftRolling knife edge Ø20 mmRolling knife edge Ø20 mmFixed knife edge Ø16 mm

Belt width

  • Type N60: 70/100/150/200/250/300/400/450/500/600/700/800/900/1.000/1.200 mm
  • Type N114: 100/200/300/400/500/600/800/1.000/1.200 mm

(other belt widths on request

 

Length (c.t.c.)

There are no standard lengths. The length can be determined by the customer. On request we could also integrate a positive and/or a negative bend in the frame.

 

Type of drives

  • Type N60
    • Direct end drive (D10)
    • Indirect end drive (D20)
    • Direct central drive (D30)
    • Indirect central drive (D40)
  • Type N114
    • Direct end drive (D10)
    • Indirect end drive (D20)
    • Direct central drive (D30)
    • Indirect central drive (D40)
Direct end drive
Indirect end driveDirect central driveIndirect central drive

Position of the drive unit

  • Left, seen from the idler side (PDL)
  • Right, seen from the idler side (PDR)
  • Left, seen from the idler side (PUSHED) (PDLd)
  • Right, seen from the idler side (PUSHED) (PDRd)
 

Velocity

On request.

 

Type of rollers

  • RT10 Standard : aluminium hard anodised rollers
  • RT30 Semi-standard: driveroller equipped with PVC sleeve
  • RT35 Aluminium hard anodised rollers with V-groove and with PVC sleeve
  • RT40 Rollers with V-groove for a belt with V-extrusion
  • RT99 Special rollers on request
Drive roller with PVC sleeve

Stainless steel options (more than 1 option is possible)

  • Stainless steel fasteners (standard galvanized steel)
  • Stainless steel shafts (standard steel)
  • Stainless steel bearings (standard steel)
 

Belt material

Material, friction, color and brand on request.

 

Belt accessories

  • Pushers (straight / bended / slanted / cube / trapezium)
  • Corrugated edge
  • Antispill edge
  • V-extrusions
  • Sponge rubber
Corrugated edge with flightsCorrugated edge with flightsFlightsFlightsAntispill edgeV-extrusionsSponge rubberSpecial antispill edgeMechanical mounted flight

Motorreductor options (optional with a forced cooling ven)

  • MR00 No motorreductor
  • MR10 Standard motorreductor 230/400V, 50 Hz, IP55
  • MR20 Standard motorreductor 230V, 50 Hz, IP55
  • MR30 High-pressure spray-resistant motorreductor 230/400V, 50 Hz, IP65
  • MR60 SEW motorreductor, 230/400V, 50 Hz, IP54
  • MR70 Drummotor IP65/66/67
  • MR99 Special motorreductor on request (for example another brand)
Standard motorreductorSEW driveSEW drive with encoderDrummotorCover cap gearbox

Electrical control options

  • E00 No electrical control options
  • E10 Motor overload protection on/emergency stop off box
  • E20 Motor overload protection on/emergency stop off box with turning-direction-switch and off button switch
  • E30 Variable speed with frequency converter and emergency stop. IP65 frequency converter in a plastic housing (v - 40%/+20%)
  • E40 Variable speed with frequency converter and emergency stop. Assembled in an IP55 housing (v - 40%/+20%)
  • E50 Puls/pause relay steering with emergency stop. Assembled in an IP55 housing
  • E60 Puls/pause relay steering with frequency converter and emergency stop. Assembled in an IP55 housing (v - 40%/+20%)
  • E99 Special electrical control options
E10 controlE20 controlE30 controlE40 controlE50-E60 control

Support

  • LT22 H-formed aluminium profile construction on feet or wheels
  • LT24 H-formed aluminium profile construction on feet or wheels for belt widths smaller than 400 mm
  • LT30 Telescopic H-formed aluminium profile construction on feet or wheels
  • LT31 Telescopic H-formed aluminium profile construction on feet or wheels for belt widths smaller than 400 mm
  • LT32 Telescopic I-formed aluminium profile construction on feet or wheels
  • LT99 Special support on request
LT22 supportLT24 supportLT30 supportLT31 supportLT32 supportLT99 special telescopic supportLT31 support with feet and wheelsLT22 supportLT99 special support

Side guide

  • GR10 Side guide GR10 15 mm bended sliding plate
  • GR20 Side guide GR20 30 mm bended sliding plate
  • GR30 Side guide GR30 30 mm Stainless steel
  • GR40 Side guide GR40 30 mm anodised aluminium
  • GR50 Side guide GR50 18 mm spherical white UHMPE
  • GR55 Side guide GR55 18 mm flat white UHMPE
  • GR60 Side guide GR60 40 mm flat green HMPE
  • GR70 Side guide with seal flap
  • GR100 Side guide GR100 100 mm flat green HMPE
  • GR99 Special side guide on request
Side guide GR10-20Side guide GR30Side guide GR40Side guide GR50Side guide GR55Side guide GR60Side guide GR70Side guide GR70Special side guide

Hang tables

Hang tables are made by the specifications of the customer. These tables can very easily be hung and / or slided in the frame of the conveyor. These tables can be used for packaging and sorting operations.

Hang tables

Toggle clamps

If the belt material must be cleaned or replaced fast and easy, toggle clamps on the idler side is an good option.

Toggle clamps