Technical specifications stainless steel belt conveyors

Below you can see some technical specifications and possibilities of the BCK stainless steel belt conveyors. Click on the photos on the right of the text to enlarge the photo or to see the more options. It is almost impossible to show all options and possibilities. Please contact us when you have other technical wishes.

Basic

Stainless steel (AISI304) frame with standard a folding idler side
Stainless steel (AISI304) frame with standard a folding idler side

Sliding plate

The sliding plate is the top of the base frame. Depending on the application, there are bumps punched in the sliding plate to prevent slip-stick.

Transport direction

Unidirectional
Bi-directional (advice is to apply a belt with 2 V-extrusions)

Roller diameter

Type BS54: ø 54 mm
Type BS80: ø 81 mm
Type BS87: ø 87 mm
Type BS100: ø 100 mm
Type BS113: ø 113 mm

Knife edges

It is possible to create a knife edge at the input or the output side

Belt width

Type BS54: 205/255/305/355/405/455/505/555/605/655/705/755/805
Type BS80: 205/255/305/355/405/455/505/555/605/655/705/755/805
Type BS87: 300/350/400/450/500/550/600/650/700/750/800/850/900/950/1000/1050/1100/1150/1200
Type BS100: 205/255/305/355/405/455/505/555/605/655/705/755/805
Type BS113: 300/350/400/450/500/550/600/650/700/750/800/850/900/950/1000/1050/1100/1150/1200

(other belt widths on request)

Length (c.t.c.)

There are no standard lengths. The length can be determined by the customer. On request we could integrate a positive and/or a negative bend in the frame.

Type of drive

Direct end drive (D10)
Indirect end drive (D20)
Direct central drive (D30)
Indirect central drive (D40)

Position of the drive unit

Left, seen from the idler side (PDL)
Right, seen from the idler side (PDR)
Left, seen from the idler side (PUSHED) (PDLd)
Right, seen from the idler side (PUSHED) (PDRd)

Velocity

On request.

Type of rollers

RT50 Rollers with a steel shell
RT51 Rollers with a steel shell, drive roller with PVC supergrip covering
RT52 Rollers with a steel shell, drive roller vulcanized
RT60 Rollers with a stainless steel (AISI304) shell
RT61 Rollers with a stainless steel (AISI304) shell, drive roller with PVC supergrip covering
RT62 Rollers with a stainless steel (AISI304) shell, drive roller vulcanized
RT99 Special rollers on request

Stainless steel options (more than 1 option is possible)

Stainless steel frame (standard)
Stainless steel fasteners (standard)
Stainless steel rollers (standard steel shell)
Stainless steel bearings (standard steel)

Belt material

Material, friction, color and brand on request.

Belt accessories

Pushers (straight / bended / slanted / cube / trapezium)
Corrugated edge
Antispill edge
V-extrusions
Sponge rubber

Motorreductor options (optional with a forced cooling ven)

MR00 No motorreductor
MR10 Standard motorreductor 4 poles, 230/400V, 50 Hz, IP55
MR20 Standard motorreductor 4 poles, 230V, 50 Hz, IP55
MR30 High-pressure spray-resistant motorreductor 4 poles, 230/400V, 50 Hz, IP65
MR40 Motorreductor 2 poles, 230/400V, 50 Hz, IP55
MR50 Motorreductor 6 poles, 230/400V, 50 Hz, IP55
MR60 SEW motorreductor, 230/400V, 50 Hz, IP56
MR70 Drummotor 230/400V, 50 Hz, IP66/67
MR99 Special motorreductor on request (for example another brand)

Electrical control options

E00 No electrical control options
E10 Motor overload protection on/emergency stop off box
E20 Motor overload protection on/emergency stop off box with turning-direction-switch and off button switch
E30 Variable speed with frequency converter and emergency stop. IP65 frequency converter in a plastic housing (v +/- 30%)
E40 Variable speed with frequency converter and emergency stop. Assembled in an IP55 housing (v +/- 30%)
E50 Puls/pause relay steering with emergency stop. Assembled in an IP55 housing
E60 Puls/pause relay steering with frequency converter and emergency stop. Assembled in an IP55 housing
E70 Alarming sound signal by start
E99 Special electrical control options

Support

LT22 H-formed stainless steel construction on feet or wheels
LT24 H-formed stainless steel construction on feet or wheels for belt widths smaller than 400 mm
LT30 Telescopic H-formed stainless steel construction on feet or wheels
LT31 Telescopic H-formed stainless steel construction on feet or wheels for belt widths smaller than 400 mm
LT32 Telescopic I-formed stainless steel construction on feet or wheels
LT99 Special support on request